WB-M1W2 and WB-MR6C version differences

WB-M1W2 v.3 versus v.2

Version 3 has a smaller enclosure for wall boxes, cable ducts and junction boxes. Its 1-Wire sensor terminal block is fixed rather than removable. Use the v.3 manual for the product listed in this catalog.

WB-MR6C v.3 versus v.2

Version 3 adds an internal mains power supply. Its common output terminals C1 and C2 are connected through that supply circuit and are not galvanically isolated. Follow the v.3 manual for wiring and isolation requirements.

This page translates the version differences relevant to the current catalog; it is not an installation manual for the previous generations.

WB-LED and the earlier WB-MRGBW-D

WB-LED is the successor discussed by the linked WB-MRGBW-D material. Use the WB-LED manual for its wiring, four inputs, output ratings and thermal protection. Firmware compatibility depends on hardware revision; do not apply an older model's wiring or limits to WB-LED.

WB-MIR v.2 and v.3

The linked v.2 page describes the previous generation. This edition documents WB-MIR v.3. Both use learned IR commands, but bank counts and other functions depend on model and firmware. Follow the v.3 register map and firmware history for the installed device.